Before you decide
What steel work involves, in plain words.
“Does it need blasting?”
It depends on the steel
Prep ranges from hand and power tool cleaning to abrasive blasting; the coating and the job set which one.
“New steel or old?”
New and existing steel
New steel usually arrives primed from the shop and needs touch-up and finish coats. Existing steel gets every coat on site, after cleaning.
“What about the floor below?”
Dryfall for overhead steel
Dryfall coatings are made for overhead steel: the overspray dries to dust before it reaches the floor.
“Does exposed steel need fire protection?”
Intumescent coatings
Intumescent coatings look like paint but swell in a fire to protect the steel. The drawings show which members need it.
Done before
Hangar steel, a metal building and a fuel tank.
Each one opens the full story.

Bank standby generator
Generator fuel tank, Ewing Township, NJ
Rusted tank primed and recoated where it stands

Private aircraft hangar
Aircraft hangar steel, Ocean County Airport, NJ
A new hangar’s steel finished bright white

Boat shop
Metal building exterior, Toms River, NJ
Metal building given a new look without new siding
What changes
From primer and rust to a finished coat.
Real photos from three jobs.

Before · Ocean County
Steel still in red primer
The hangar's steel, girts and window framing before painting.

After · Ocean County
Two full coats of urethane
The same hangar finished in white.

Before · Ewing Township
A rusted fuel tank
The standby generator's tank before it was primed over the rust.

During · Toms River
A straight color line
The two-tone line masked with paper and tape across the ribbed siding.
Still weighing it up?
Call and ask about your steel, the access or your building.
If a job needs blasting, we arrange it. If another system suits the job better, we'll say so.